Medical Overall Hospital ICU Lightweight Disposable Coveralls
Clothing Protection Suit
The disposable medical protective clothing produced by our company
is made of spunbond non-woven fabric,
Adopting PE air permeable membrane composite technology, the
production environment reaches the environmental standard of 100000
class clean workshop
The whole production process is in line with the technical
requirements of medical protective clothing, meeting the
requirements of
Gb19082-2009 (technical requirements for disposable medical
protective clothing), anti static
Good electrical performance, hydrostatic pressure, filtration
efficiency, anti synthetic blood penetration, strong fracture
The strength, elongation at break and other indexes meet the
requirements of the standard, which can effectively prevent dust
and water.
It can be used for the protective clothing of the medical staff in
the general ward of the medical institution, effectively preventing
the patients from coming
People's virus spreads to medical staff with air or liquid.
1 product model / specification and division description
1.1 scope
The technical requirements are applicable to contacting potentially
infectious patient's blood for medical personnel during work
Disposable protective clothing for medical use that provides
barrier and protection for body fluids, secretions, particles in
the air, etc
(hereinafter referred to as protective clothing).
2. Performance index
2.1 appearance
2.1.1 the protective clothing shall be dry, clean and free of
mildew, and the surface shall be free of adhesion, crack, hole and
other defects.
2.1.2 the connection part of protective clothing can be processed
by needle sewing, bonding or heat sealing. The pinhole of the
needle seam should be sealed
For treatment, the needle spacing shall be 8-14 stitches every 3cm,
and the stitches shall be even and straight without jumping. Gluing
or
After heat sealing and other processing, the parts shall be flat
and sealed without bubbles.
2.1.3 the zipper of the protective clothing with zipper shall not
be exposed, and the pull head shall be self-locking.
2.2 structure
2.2.1 the protective clothing is composed of hooded top and
trousers, which is a one-piece structure, as shown in Figure 1.
