Method of Use
1. Open the package and take out the Medical Disposable protective
coverall.
2. Unzip it and wear it from your feet.
3. Wear the sleeves and close the zipper; tear the double-sided
tape and stick it to the placket.
Storage and Transportation
The packaged products shall be stored in clean, dark, non corrosive
and well ventilated rooms with relative humidity no more than 80%.
The transportation conditions shall be in accordance with the order
contract, and shall be handled with care to prevent heavy pressure,
direct sunlight and rain and snow
1 product model / specification and division description
1.1 scope
The technical requirements are applicable to contacting potentially
infectious patient's blood for medical personnel during work
Disposable protective clothing for medical use that provides
barrier and protection for body fluids, secretions, particles in
the air, etc
(hereinafter referred to as protective clothing).
2. Performance index
2.1 appearance
2.1.1 the protective clothing shall be dry, clean and free of
mildew, and the surface shall be free of adhesion, crack, hole and
other defects.
2.1.2 the connection part of protective clothing can be processed
by needle sewing, bonding or heat sealing. The pinhole of the
needle seam should be sealed
For treatment, the needle spacing shall be 8-14 stitches every 3cm,
and the stitches shall be even and straight without jumping. Gluing
or
After heat sealing and other processing, the parts shall be flat
and sealed without bubbles.
2.1.3 the zipper of the protective clothing with zipper shall not
be exposed, and the pull head shall be self-locking.
2.2 structure
2.2.1 the protective clothing is composed of hooded top and
trousers, which is a one-piece structure, as shown in Figure 1.
